400-6700-653

Qingdao Gihon Auto Parts Co., Ltd.
Add: No. 516, Yinzhushan Road, Huangdao District, Qingdao, Shandong, China

Mobile version

 

© Qingdao Gihon Auto Parts Co., Ltd.  鲁ICP备13004527号 Powered by 300.cn

 

Service Hotline:

400-6700-653

NEWS

>
>
>
How can I not stop? Top ten brake failure
Company news
Industry information

How can I not stop? Top ten brake failure

Classification:
Industry information
Author:
Source:
2019/01/29 17:25
Page view

The new car is bought back, and everything is new, but with the use, how is the motivation enough? How to brake is not so good? What if it affects driving safety? Have you seen the following brake failures? If there is any, please solve it according to the cause of the failure:

Brake system affects driving safety
1. Fault phenomenon: step on the brake pedal, the pedal does not rise, no resistance;
Possible causes of failure: Check if the brake fluid is missing; whether there is oil leakage at the brake cylinder, pipeline and joint; whether the master pump and the pump parts are damaged.
2. Fault phenomenon: the brake pedal is stepped on the bottom, the braking effect is not good; the continuous braking, the effect is not improved, and the pedal gradually rises;
Possible cause of failure: Gas is mixed in the brake system.
3. Fault phenomenon: continuous stepping on the brakes, the pedal return position is raised, and the braking effect is improved;
Possible cause of failure: The gap between the friction lining and the brake drum is too large.
4. Fault phenomenon: continuous stepping on the brakes, the pedal position is raised, and there is a feeling of sinking;
Possible cause of failure: oil leakage.
 
 
Brake disc overheating will affect the brake safety distance
5. Fault phenomenon: the pedal position is very low; if you step again, the position cannot be raised, and the feeling is hard;
Possible cause of failure: The main pump is blocked.
6. Fault phenomenon: the pedal height is normal, not soft and not sinking, but the braking effect is not good;
Possible cause of failure: The gap between the friction lining and the brake drum is too large or oily.
7. Fault phenomenon: brake deviation;
Possible cause of failure: If the car is skewed to the left, the right wheel will not brake, and vice versa.
8. Fault phenomenon: the car travels for a long distance, and the brake drum (disc) is hot;
Possible cause of failure: Check the master cylinder, brake cylinder or piping.
9. Fault phenomenon: the free travel of the brake pedal is too small;
Possible cause of failure: need to be adjusted.
10. Fault phenomenon: the brake fluid level rises slowly;
Possible causes of failure: Loosen the bleeder screw and observe the brake shoe return position. If the brake shoe is returned, the oil pipe should be cleared; if the brake shoe does not return, the brake cylinder should be dismantled.
Previous article: